Category Archives
Categories
Marshall JMP50 (1987) Build
Building a Marshall JMP50 (1987) Clone.
JMP50 Clone Build, Part 10Posted by Kurt on Sunday, February 01, 2009 at 07:30 PM
A shakedown run with the new JMP50 clone. It lives!
Final setup and initial testing on my JMP50 clone
Posted by Kurt on Saturday, January 31, 2009 at 05:47 PM
Nearing the end of building my JMP50 clone. The turret board is populated and a Lar/Mar PPIMV is wired in. But does it work?
Posted by Kurt on Wednesday, January 28, 2009 at 11:50 PM
A long night’s work on the JMP50, soldering the leads onto the turret board before installing it in the chassis.
Posted by Kurt on Sunday, January 25, 2009 at 11:13 PM
The JMP50 build saga continues as I fabricate the turret board from scratch, drilling and mounting nearly 70 wee small turrets.
Posted by Kurt on Saturday, January 24, 2009 at 11:18 PM
I’m making good headway on the JMP50 clone build. Tonight I installed the Marstran power transformer, mains voltage selector switch, output jacks and output impedance selector switch.
Posted by Kurt on Thursday, January 22, 2009 at 10:08 PM
The JMP50 build continues with a new amp work stand and heater wires installed.
Posted by Kurt on Sunday, January 18, 2009 at 10:00 AM
A year later, I’ve returned to my project JMP50 build. Transformers from Brian Wallace at Marstran, tube sockets and cap cans are all installed.
Posted by Kurt on Saturday, December 29, 2007 at 09:00 AM
The JMP50 chassis is back from the powder coater, sporting a shiny black exterior. Let the building commence!
Posted by Kurt on Tuesday, December 18, 2007 at 12:25 AM
Part 1 of my JCM800 (2204) JMP50 (1987) Build